Left: labelled RBCs injected into a circulation of unknown volume mix and are counted in a 1 mL sample. Right: the V = Q / [q] calculation. The second step shows red cell mass and plasma volume bars for normal, absolute and relative erythrocytosis.

Step 1/2

Dilution principle

A known amount of label (Q) is injected and allowed to mix (15-20 min for Cr-51 RBCs). Activity per mL ([q]) is then measured in a blood sample, and volume is V = Q / [q]. Cr-51-labelled RBCs measure red cell mass (RCM); I-125 albumin measures plasma volume (PV).

Dilution principle0 min after injectionQ = 400 units of labelled RBCs (Cr-51)1 mL sample…[q]Schematic; particle count representative.
Volume calculationV = Q / [q]Q: injected activity; [q]: activity per mL in sampleWaiting for mixing (15-20 min)…True volume in the drawing: 21.7 mLValues representative; male normal RCM 25-35, PV 40-50 mL/kg.
Continuous stream · no seeking

V = Q / [q]: after mixing, the concentration in a sample gives the volume; high RCM is absolute and normal RCM with low PV is relative erythrocytosis.

Source: method, mixing time and normal values from book 20.4. Particle count and scenario values representative.

How to use: a single click on the drawing pauses and resumes; in the second step ↑ ↓ or the buttons below change the scenario (normal, absolute, relative polycythaemia); ← → change steps.

Did this animation help you understand the topic?

Dilution principle: red cell mass and plasma volume · Open in Nuclear Medicine Explained ↗