Basic sciences · 3 steps

Scintillation detector and PMT

In a scintillation detector the energy passes through several conversions and carriers are lost at each; at 140 keV ~900 photoelectrons give ~10% resolution, CZT's ~30,000 carriers ~5–6%.

A 140 keV γ photon converted to light in a NaI(Tl) crystal, to electrons at the photocathode and multiplied at the dynodes; carrier numbers and photopeak width in NaI and CZT are shown.

Continuous stream · no seeking

Key point: in a scintillation detector the energy passes through several conversions and carriers are lost at each; at 140 keV ~900 photoelectrons give ~10% resolution, CZT's ~30,000 carriers ~5–6%.

Source: book (NaI ~38 photons/keV, ~415 nm, ~230 ns; quantum efficiency 20–30%; dynode ×3–6, 10–12 dynodes; CZT 3–5 eV per carrier). Assumptions: ~70% of light reaches the photocathode, QE 25%, ×4; CZT W ≈ 4.6 eV (published value). In CZT other effects such as charge trapping also limit resolution. Micro scale: I K shell 33.17 keV, I Kα 28.6 keV (Bearden 1967); photoelectron path from the integral of the NIST ESTAR stopping power (NaI); mean free path at 28.6 keV in NaI 0.33 mm (NIST XCOM). Magnetic field: r = m·v/(e·B), ≈ 11 µm for a 100 eV electron at 3 T (~100 V between dynodes assumed); orbits are drawn enlarged.

How to use: a single click on the drawing pauses and resumes; ← → change steps; in the photocathode and dynodes step ↑ ↓ or the buttons below switch the MR field on and off.

Did this animation help you understand the topic?

Presentation mode ↗The animation alone, sized for full screen; for projecting in lectures and talks. ← → step, space plays/pauses.

Embed

Paste this code into your own page (course site, slides, learning platform). The animation arrives working, with its source written underneath.

Stage

In the book

In the book this animation runs in place of these figures: