Basic sciences · 2 steps

Anger logic and crystal thickness

The weighted mean of the PMT signals gives the position and their sum the energy; a thick crystal catches more photons but spreads the light wider, so the position becomes less certain.

In a gamma camera the scintillation light spreads to the PMTs, position is found by a weighted mean and energy by the summed signal; the fraction of photons absorbed and the light spread by crystal thickness are shown.

Continuous stream · no seeking

Key point: the weighted mean of the PMT signals gives the position and their sum the energy; a thick crystal catches more photons but spreads the light wider, so the position becomes less certain.

Source: book (NaI(Tl) 3/8 inch, 3.67 g/cm³; X = Σ(Xᵢ·Sᵢ)/ΣSᵢ, Z = ΣSᵢ; Tc-99m window 126–154 keV). Absorption from the NIST XCOM NaI total attenuation coefficient (coherent included); the book's ~30% at 364 keV is the photopeak efficiency, as part of the interacting photons escape by Compton scattering. In the crystal-thickness step the side view is drawn at 2× vertical scale (light guide 12 mm). Light spot: point light source, reflections ignored, FWHM ≈ 1.53 × distance to the PMT plane. Model assumptions: 37 PMTs, 76 mm pitch, 12 mm light guide, ~930 photoelectrons at 140 keV, Poisson noise; PMTs below 10% of the largest signal ignored (like the threshold in modern cameras); scattered photons ~25% of events, 95–125 keV (illustrative).

How to use: a single click on the drawing pauses and resumes; in the crystal thickness step ↑ ↓ change the thickness, the buttons below change thickness and energy; ← → change steps.

Did this animation help you understand the topic?

Presentation mode ↗The animation alone, sized for full screen; for projecting in lectures and talks. ← → step, space plays/pauses.

Embed

Paste this code into your own page (course site, slides, learning platform). The animation arrives working, with its source written underneath.

Stage

In the book

In the book this animation runs in place of these figures: